- Home
- No Tools 2" Cordless Vinyl Faux Wood Blinds
Measuring Instructions for No Tools 2" Cordless Vinyl Faux Wood Blinds
3 minutes to measure.
Inside Mount
Let's make sure you have what you need!
- A metal tape measure
- Pen and paper to record all measurements
- Check if you have sufficient depth: Measure inside the window opening from the front to the back of the opening where the blind would mount. The depth must be at least 1 7/8”. To have a flush mount (fully recessed) the depth must be at least 3”. If your depth is not sufficient please see our outside mount instructions
How to Measure:
Let's start with the Width:
- Inside of the window opening/frame measure from left to right at the top of the opening, the middle of the opening, and then the bottom of the opening. Write down all 3 measurements and circle the narrowest. If rounding is necessary, round down to the nearest 1/8”. That is your ordering width.
Now, let's do the Height:
- Inside of the window opening/frame measure from the top of the opening to the bottom of the opening/sill on the left-hand side, the middle, and on the right-hand side. Write down all 3 measurements and circle the tallest. That is your ordering height.
Note: The factory will make the necessary deduction of approximately ¼" to your Width to account for movement in the window opening and to ensure that the valance will fit. No deductions will be made to your Height.